LEM LC1000-S/SP7 Product Details
Product Overview
LEM LC1000-S/SP7 is a high-precision current sensor produced by LEM.It is mainly used to measure AC current and is widely used in motor drives,power electronics,industrial automation and other fields.This sensor is widely used for its high accuracy,high reliability,wide dynamic range and other characteristics.
Main Functions
Current Measurement:High-precision measurement of AC current and convert it into a proportional voltage signal.
Isolation:Provide electrical isolation to ensure safety between the measuring circuit and the circuit being measured.
Wide Bandwidth:With a wide bandwidth,it can measure rapidly changing current waveforms.
High Linearity:The output signal is linearly related to the input current,which is convenient for signal processing.
Technical parameters(please refer to the product data sheet for specific parameters)
Primary rated current:1000A
Secondary output:250mA
Conversion ratio:1:4000
Accuracy:±0.5%
Bandwidth:100kHz
Isolation voltage:3kV
Application areas
Motor drive:Measure motor current for motor control and protection.
Power electronics:Measure current of power electronic devices such as frequency converters and inverters.
Industrial automation:Measure current on production lines for process control and fault diagnosis.
